Work table with drawer cupboard mobile pedestal with 4 drawers 1 x 90, 2 x 120, 1 x 140 mm

Frame with 4 legs with two pairs of frame legs made of profiled steel tubing 60 x 30 x 2 mm incl. side cross struts (top and bottom). Frame legs at the bottom with end element incl. height adjustment. Cross struts made of profiled steel tubing 50 x 25 x 2 mm at the top under the worktop (front and rear). Bracing beams at the rear (left and right) as a connection between the pair of frame legs and the rear cross strut. The frame legs are configured for installation/retrofitting of a castor set. Mobile pedestal, WxDxH 480 x 600 x 690 mm. 4 drawers 1 x 90, 2 x 120, 1 x 150 mm. Internal drawer WxD 390 x 560 mm, max. load 35 kg, 90% extension. The effective height of the drawer is equivalent to the front height minus 15 mm. Drawer tray fully closed to ensure that drawer partition sets fit properly. Full length, partially integrated handle (incl. labelling strips). Central locking (pin cylinder lock with 2 keys). Cupboard incl. metal shelf at the top with a raised edge on 4 sides and an anti-slip mat, height 20 mm. Push handle attached to the front of the metal shelf (push handle protrudes 50 mm). 4 swivel castors, 2 with wheel stops. Wheel diameter 100 mm, overall height 125 mm, running surface made of thermoplastic rubber (grey, non marking, 85° shore), wheel body made of polypropylene. Swivel castors with wheel stops fitted at front (left and right). Overall max. load 450 kg. Powder coating.