Ref.: 851331 10

PremiumLine full body emergency shower – B-SAFETY for wall mounting

PremiumLine full body emergency shower – B-SAFETY

stainless steel

Ref.: 851331 10
Product description
  • High-output shower head for a limited, steady and soft jet of water
  • Optimised for rinsing chemicals off the skin
  • Robust and corrosion-resistant stainless steel construction
  • Self emptying, largely limescale-free and maintenance free
The B-SAFETY body emergency showers of the PremiumLine series are made of stainless steel and are equally suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and cleanrooms.

The body emergency showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and DIN EN 15154, but is also self-draining, largely scale-free and maintenance free, as well as very robust and corrosion-resistant. The limited, uniform and, above all, soft water jet is optimised for rinsing chemicals from the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure available on site. With the enclosed sign according to DIN EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The recognition distance is 15 metres.

– Wall flange with 4 mounting holes made of stainless steel, polished, mounting height 2345 mm (±100 mm)
– 3/4-inch ball cock made of stainless steel, with pull rod actuation, pull rod with ring handle made of stainless steel, polished, length 700 mm
– 3/4-inch wall-mounted shower arm made of stainless steel, polished, projection 625 mm
– Including plug-in connection with integrated automatic flow regulator 50 litres/minute for a standard-compliant spray pattern at a specified operating range of 1.5 to 3 bar flow pressure, water connection 3/4-inch internal thread
– 3/4-inch quick assembly system as a plug-in nipple made of stainless steel, for quick on-site assembly and easy alignment of the shower arm
– According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717, ANSI Z358.1-2014, DIN EN 15154-1:2006 and DIN EN 15154-5:2019. DIN-DVGW tested and approved
Technical data
Max. pressure up to3 bar
Thread3/4 inch
Height700 mm
Depth630 mm
Water flow50 l/min
Colourstainless steel
Materialstainless steel
Type of mountingwall mounting
Min. pressure1.5 bar
Product typeemergency showers
Suppliedflat pack
Weight3.5 kg
Datasheet
Declaration of conformity

Security and product resources

ContactNo addresses were found.
Sustainability
Product with potential for future improvement

This product does not yet meet enough of our sustainability criteria. This does not mean that it has no sustainable properties – however, the total score is lower than 3 points. Therefore, it is not (yet) labelled as particularly sustainable. Our sustainability assessment is based on transparent, clearly defined ecological, social and economic criteria. The aim is to highlight development potential and create greater transparency.

You can find out more about product evaluation and our sustainability initiative on our information page.
Recyclable
Recyclable products are products that can be recycled at the end of their service life, providing they are separated into all their individual components in designated recycling facilities. This means that the individual components are made of materials that can be exploited using the recycling process and be reprocessed into new products. Recyclable products help reduce the environmental impact of waste and to conserve resources.
‌
‌
‌